chicken farm equipment other Other breeding equipment
1. Main Feed line System
silo/manpower hopper is the beginning of main feed line. There is a
feed sensor at the end of main feed line which controls motor on
and off to achieve automatic feed delivery from silo or manpower
hopper/feed bin to vice hopper in each feeding line.
silo with standard ladder and guard railing is safe and reliable.
solid connection and good sealing prerformance
manpower
Volume: 600kg 800kg 1200kg
driving motor:
power:0.75kw/1.1kw/1.5kw voltage:0.75kw/1.1kw/1.5kw
Frequency:50hz/60hz, 3phase/1phase
Feed sensor: IFM brand from Germany.
2.Automatic Pan Feeding Line System
The feed in the silo is transported to the hopper of the feed line,And the transmission closure of the driving motor is controlled by
the feed level sensor.
TubeΦ45mm diameter
material:hot-dip galvanized steel pipe with the zinc coating amount
of more than 275/m2
Auger: Helical spring auger imported from South Africa,
Feeding ability:450kg/h
Pan Feeder4 pans/3 meters, 3 pans/3 meters.
Feed Sensor: IFM from Germany, time delay range 0 to 2 hours.
when feed sensor is installed inside the feed pan(connect to
open),driving motor starts work to convey feed , when feed sensor
dose not touch feed,and it shops conveying feed when feed sensor
touchs feed (for main feed line and pan feeding line use)
feed pan
feedpan slide switch could adjust feed flow until it is filled.
pan bottom can be disassembled on the ground,working for day-old
chicken.
V-pan place design can reduce feed storage on bottom, so birds can
always eat fresh feed. the design can also prevent birds from
staying too long on the plate.
the edge of pan plate tilt towords the center, which can avoid
waste of food.
thesmooth edge can prevent the craw of birds from hurting and make
sure safety and comfort feeding.
feed pan installation has fixed type or swing type.
